"Channel spacing is irrelevent."

If the mic is causing the TX to deviate outside the expected receiver band then it's not irrelevant and will be squelched. It's basic receiver limitations, DSP or no DSP.

Tony
From: chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.com> on behalf of Nigel A. Gunn G8IFF/W8IFF <nigel@ngunn.net>
Sent: Sunday, January 5, 2020 1:44:35 PM
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>; Jonas Haiduk <jhaiduk@hotmail.com>
Subject: Re: [chirp_users] Programming Troubles
 
Channel spacing is irrelevent.
He cant hear you because you have CTCSS encode on and he DOES NOT have CTCSS decode on. You both need either encode AND decode ON or both OFF.

On 05 January 2020 at 11:52 Jonas Haiduk <jhaiduk@hotmail.com> wrote:

My friend gave me a spreadsheet of frequencies programmed into his radio, which included the following 



I can hear him through my radio, but I cannot send to him so that he can hear me. Attached is a screenshot of what I attempted in CHIRP. I have a feeling the problem I am experiencing is due to the Channel Spacing column from his spreadsheet, which I'm not sure how to deal with in CHIRP

I have a BAOFENG A-58 and am using CHIRP for Mac. 

Thanks in advance for any help!

Jonas

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

 

Nigel A. Gunn, ///shoulders.outwards.resolutions   tel +1 937 825 5032
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net