On 23 August 2020 at 18:04 Charles Gierke <cgierke@cox.net> wrote:

hi, still no luck.
I went to the web site and put a death-grip on the plug and held it in as far as it would go. I trimmed a hair of the edges of the plug to let it seat on the bottom.

thanks for the suggestions

On August 22, 2020 at 5:55 PM John LaMartina <JohnLa@usa.net> wrote:

This may assist.

Www.Miklor.com/COM/UV_ErrorMess.php 

John

Www.Miklor.com/UV5R 

On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke@cox.net> wrote:

On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP. 

On Friday all I got was the following message:  Radio Did Not Respond.

I tried reloading the latest version of CHIRP, no change.  I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change.  Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.

Any suggestions?

Thanks Chuck KJ7INT

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to John LaMartina at johnla@usa.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

 

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chuck at cgierke@cox.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

  _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com