I have had no trouble with the 4 I have, using a Baofeng cable (that I originally bought for my first UV-5R) on Windows 7.
- Trevor, AG7GX
On 5/19/2017 8:50 AM, James Flanders wrote:
OK then; Who has had good experience reading the BF-888s, and how?
James Flanders w0oog@verizon.net
-----Original Message----- From: Kirby joekirby@gmail.com To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Sent: Fri, May 19, 2017 6:34 am Subject: Re: [chirp_users] Cannot read Baofeng BF-888S
On 19/05/17 11:22, Nate Alvin wrote:
going to expire. Using the same computer, same "fake prolific" Baofeng cloning cable and the updated daily CHIRP software i was able to reprogram the UV5R, but when i went to read the BF888S i received the error message "radio refused to enter programming mode". Any help would be appreciated. Thanks
I have had the same issue using Fedora. If I repeat trying to read/write the BF888S about 90% of the attempts fail, but every once in a while it works.
--
chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jim at w0oog@verizon.net mailto:w0oog@verizon.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com