Thanks for the help Jim. I've already done as you instructed but I was wanting to find a way to program the PL because another town's PD is coming through too. I was wondering if there is a way to block unwanted signals.
-------------------------------------------- On Fri, 12/6/13, Jim Unroe rock.unroe@gmail.com wrote:
Subject: Re: [chirp_users] Programming PL into UV-5R To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Date: Friday, December 6, 2013, 7:54 AM
On Fri, Dec 6, 2013 at 6:23 AM, scott richardson elmrich120966@yahoo.com wrote:
Hey guys. I need a little help getting a PL into a frequency. Here is the frequency I want to do this on.
Frequency- 154.78500
Type-RM
Tone-465 DPL
All my information came from Radiorefence.com . I'm not interested in transmitting just receiving. Any help would be appreciated.
Hi Scott,
Here is the minimum that you have to do
Frequency: 154.785 Duplex: off
That's it. You never have to set PL (CTCSS) or DPL (DTCS) just to listen.
Optional things would be
Mode: NFM {UV-5R doesn't change any receiver settings for narrow/wide} Skip: "S" to skip the channel when scanning
Jim KC9HI
-----Inline Attachment Follows-----
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users