Hi,
first of all, many thanks to Dan and the Developer for develop Chirp! The Idea and the result is great. So far as i can see, there is no specification given from Baofeng (and other) how the interface works. So you have to reenginer the data which comes over the serial port. I think, this take a lot of time to understand and to find a fitting memory structure. And, of course, there is a need for a given running software!
Ok, my Problem is, i got a Pofung UV-6R, but it doesn work with Chirp. The Firmware is "HDBF230" and the magic key for entering programming mode differs from tke key in uv5r.py
UV5R_MODEL_ORIG = "\x50\xBB\xFF\x01\x25\x98\x4D" UV5R_MODEL_291 = "\x50\xBB\xFF\x20\x12\x07\x25" UV5R_MODEL_F11 = "\x50\xBB\xFF\x13\xA1\x11\xDD" UV5R_MODEL_UV82 = "\x50\xBB\xFF\x20\x13\x01\x05" UV5R_MODEL_UV6 = "\x50\xBB\xFF\x20\x12\x08\x23" UV5R_MODEL_UV6_ORIG = "\x50\xBB\xFF\x12\x03\x98\x4D" UV5R_MODEL_UV6_HB = "\x50\xBB\xFF\x20\x14\x11\x22" UV5R_MODEL_A58 = "\x50\xBB\xFF\x20\x14\x04\x13"
i added the entry UV5R_MODEL_UV6_HB but this helps only a liitle step.
Unfortunately the Software from Baofeng 20130521142814635.rar and Miklor UV6R_Setup_EN_V1.10.rar works only in direction reading.
Does anyone have an idea whats wrong with my UV-6R?
Thanks, Heiko (DH2FAA) <-- German Amateur Radio