I have one cable that is ch340 and I am fairly sure this driver works on 10
http://www.miklor.com/COM/software/P3200.zip

Dennis M. Wage (W9BOQ)

245 Corum Hill Road


On Sun, Feb 17, 2019 at 12:38 PM D.J.J. Ring, Jr. <n1ea@arrl.net> wrote:
Marcus,

I don't speak German either!

Try both drivers.  You show one that has a mark on your cable in Device Manager, try this first, then update the Driver.

Usually the problem is that when the Driver is updated, the fake counterfeit chips stop working but they work on the old driver.

See if you can borrow someone else's cable who lives near you.  That's often the answer to all problems.

I did exactly that and found my problems were caused by my own errors!  How embarrassing because at one time I was actually good at this stuff.

73
Grüße

David N1EA 




On Sun, Feb 17, 2019, 13:19 tuvok <tuvok@shell-flughafen.de> wrote:

hm .. i think this will not run with this driver

Grüße

Markus
Mail: tuvok@shell-flughafen.de
Web: http://www.discoteam-excalibur.de
Am 17.02.2019 um 16:30 schrieb D.J.J. Ring, Jr.:
Markus,

Show under Device Manager the Driver for this device.


It will tell you everything you need to do to get your cable working.

But first just make sure that you press the cable end with the two pins very firmly into the microphone socket on the Wouxun.  Just to make sure!

I'm guessing you have a counterfeit Prolific type chip in your cable.

The page above will show you what to do.  If this is the problem, you will have to do this each time you use programming software with Windows because of the counterfeit chip in the cable.

Otherwise buy a genuine WOUXUN cable or this:  

PC03 FTDI Genuine USB Programming Cable for BTECH, BaoFeng, Kenwood, and AnyTone Radio 

https://www.amazon.com/PC03-Genuine-Programming-Cable-BaoFeng/dp/B00HUB0ONK/ref=asc_df_B00HUB0ONK/


73

David
N1EA 





On Sun, Feb 17, 2019, 08:32 tuvok <tuvok@shell-flughafen.de> wrote:
i use this cable
https://www.ebay.de/itm/DE-Zweiweg-USB-Programmierkabel-Software-BaoFeng-UV-5R-5RA-5RE-BF-888S-Radios/273519665463?hash=item3faf0ae137:g:7D0AAOSwWOxbzU7g:rk:1:pf:0


73

Grüße

Markus
Mail: tuvok@shell-flughafen.de
Web: http://www.discoteam-excalibur.de
Am 17.02.2019 um 14:25 schrieb D.J.J. Ring, Jr.:
Push in the cable to the Wouxun transceiver?

What cable are you using?  

73

David
N1EA 

On Sun, Feb 17, 2019, 07:53 tuvok <tuvok@shell-flughafen.de> wrote:
Hello,
when i will download from the Radio KG-UV2D i get this message..

this is my Cable..


Grüße

Markus
Mail: tuvok@shell-flughafen.de
Web: http://www.discoteam-excalibur.de
Am 15.02.2019 um 23:00 schrieb tuvok:
Hello,
is this Possible, for programming the Wouxun KG-UV2D Radio with chrip?
I have a Windows 10 System and have buy a USB Cable but i have no idea 
why is the UV2D not on the list.. a Friend have say me .. in a Old 
version he have found this Radio
Can anybody help me?
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Markus at tuvok@shell-flughafen.de
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Dennis Wage at dwage@dwage.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com