6 Jan
2023
6 Jan
'23
9:13 p.m.
------- Original Message -------
On Friday, January 6th, 2023 at 09:55, K0LNY_Glenn glenn@ervin.email wrote:
Another approach is to bevel the four edges with a pocket knife, affectively making the insertion piece a bit smaller, because it may not be the flat surface that is the problem, but the outer diameter of the plug
That is what I wound up doing (I used a Dremel and a rattail file) and it solved the problem nicely.
The Doctor [412/724/301/703/415/510] WWW: https://drwho.virtadpt.net/ The old world is dying, and the new world struggles to be born. Now is the time of monsters.