His spreadsheet says he has decode off, so he should hear you no matter what. Try removing TSQL from the Tone Mode column. Really the way you both have your radios set, the result should be the opposite, where he can hear you but you can't hear him. Unless I have who's is who's settings backwards.

Dennis M. Wage (W9BOQ)

245 Corum Hill Road


On Sun, Jan 5, 2020 at 11:02 AM Tony Fuller <goldstar611@hotmail.com> wrote:
I believe that a channel spacing of 12.5kHz corresponds to narrow band fm, or NFM in a lot of chirp drivers. See if changing the mode from FM to NFM helps -- hopefully that is an option.

Tony
From: chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.com> on behalf of Jonas Haiduk <jhaiduk@hotmail.com>
Sent: Sunday, January 5, 2020 10:52:35 AM
To: chirp_users@intrepid.danplanet.com <chirp_users@intrepid.danplanet.com>
Subject: [chirp_users] Programming Troubles
 
My friend gave me a spreadsheet of frequencies programmed into his radio, which included the following 



I can hear him through my radio, but I cannot send to him so that he can hear me. Attached is a screenshot of what I attempted in CHIRP. I have a feeling the problem I am experiencing is due to the Channel Spacing column from his spreadsheet, which I'm not sure how to deal with in CHIRP

I have a BAOFENG A-58 and am using CHIRP for Mac. 

Thanks in advance for any help!

Jonas

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Dennis Wage at dwage@dwage.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com