[chirp_users] Wouxun KG-UV8D Won't Open Squelch

I still cannot get the Wouxun KG-UV8D to program properly. I have tried both Windows 10 and Linux versions of Chirp with similar results. This problem persists with three different radios.

A possible clue: After programming the radio, I manually go to the R-DCS menu item and change D77I to OFF; that channel then immediately starts working and opens the squelch on receive.

How do I tell Chirp to set R-DCS to OFF for all channels?

Here are the first few channels from the CSV file:

Location Name Frequency Duplex Offset Tone rToneFreq cToneFreq DtcsCode DtcsPolarity Mode TStep Skip

1 146.52 146.52 0 88.5 88.5 23 NN FM 5

2 446 446.6 - 5 88.5 88.5 23 NN FM 5

3 144.39 144.39 0 88.5 88.5 23 NN FM 5

4 144.01 145.01 0 88.5 88.5 23 NN FM 5

5 146.98 146.98 - 0.6 Tone 162.2 88.5 23 NN FM 5

One of the user group members suggested I post the file to the group. How do I do that??? I do not see any instructions about posting files.

Thanks, Joe, W7LUX