I use it on pc to program icom units no issues unless win 10 has done an update which knocks the driver aroundSent from my Galaxy -------- Original message --------From: Ken Vernon kennethjv@bigpond.com Date: 21/11/20 13:33 (GMT+10:00) To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Programming Baofeng GT3 - Mk11 Have tried wiggling, etc without success .. do you know if this program is better suited to PC or Mac?Sent from my iPhone> On 21 Nov 2020, at 13:12, Jim Unroe rock.unroe@gmail.com wrote:> > Ken,> >> On Fri, Nov 20, 2020 at 9:02 PM Ken Vernon kennethjv@bigpond.com wrote:>> >> Hey Jim, would it be a fair assumption that if the cable and chirp program works for my gt3tp and uv5r it should be ok for the GT3 mk11?>> > > Yes. Try pressing on the plug a little during the cloning process.> > Jim> _______________________________________________> chirp_users mailing list> chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users%3E This message was sent to Ken at kennethjv@bigpond.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com_______________________________________________chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_usersThis message was sent to Alan at straty10@gmail.comTo unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com