Anyone that can help??
Mats
On Oct 17, 2013, at 2:06 PM, Mats G Roos mats.g.roos@gmail.com wrote:
Hi y'all, Just got a JB UV 55 radio, it's basically the "car" version of the UV 5 R, seems to even have almost the same channel / memory structure. Does anyone out there have any Experiance on how to program it through Chirp?
Appreciate your support
Mats SM0BTP
On Oct 14, 2013, at 9:13 PM, Jim Hofmann jimhofmann12@yahoo.com wrote:
Users,
So, it turns out, every cable has a needs an unique driver. The cable I have can be seen here - http://www.amazon.com/Programming-Cable-Baofeng-UV-5R-Driver/dp/B008RZJHJU/r...
If that is the case, one needs a driver from - http://changux.co/osx-installer-to-pl2303-serial-usb-on-osx-lio/
Thanks! Jim
On Monday, October 14, 2013 9:28 PM, Dan Smith dsmith@danplanet.com wrote:
I'm attempting to "Download from radio", I try the four port selections.
Sounds like you don't have a driver loaded for the cable that gives you a serial device. Usually /dev/cu.*.
Check this page for details:
http://chirp.danplanet.com/projects/chirp/wiki/MacOS_Tips
-- Dan Smith www.danplanet.com KK7DS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users