I have had the same issue with a 760H. Talked with Pavel. He seems to think its a firmware issue that he has not resolved at this time. Good luck. KC1EXK. On May 15, 2016 3:28 AM, "Tim Billingsley" kd5ckp@gmail.com wrote:
I have a couple of old Kenwood TK-762H transceivers. I see the issue on http://chirp.danplanet.com/issues/3139 but I seem to be having troubles. When I attempt to read from the radio using TK-762G it appears to read from the radio then dumps the error dialog *"An error has occurred: The radio doesn't accept program mode"*
ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in run self.__radio.sync_in() File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 884, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 517, in do_download _open_radio(radio, status) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 478, in _open_radio raise errors.RadioError("The radio doesn't accept program mode") RadioError: The radio doesn't accept program mode
ERROR: ---------------- ERROR: Clone failed: The radio doesn't accept program mode ERROR: --- Exception Dialog: The radio doesn't accept program mode --- ERROR: None
ERROR: ----------------------------
If I attempt using TK-760 chirp attmpts to read and almost immediately dumps the error dialog saying *"An error has occurred Radio refuse to enter into program mode after a few tries"* ERROR: ---------------------------- ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in run self.__radio.sync_in() File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 411, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 255, in do_download open_radio(radio) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 227, in open_radio raise errors.RadioError(msg) RadioError: Radio refuse to enter into program mode after a few tries
ERROR: ---------------- ERROR: Clone failed: Radio refuse to enter into program mode after a few tries ERROR: --- Exception Dialog: Radio refuse to enter into program mode after a few tries --- ERROR: None
ERROR: ----------------------------
FWIW I am running CPU~Dual core AMD E2-1800 APU with Radeon HD Graphics (-MCP-) speed~1700 MHz (max) Kernel~4.2.0-34-generic i686 Mem~2035.9/3635.1MB HDD~750.2GB(35.9% used) Ubuntu 15.10 CHIRP daily-20160513 GTK 2.24.28 PyGTK 2.24.0 Python 2.7.10
I am also having issues with a QTY KT8900 I have tried to follow all this has been discussed on http://chirp.danplanet.com/issues/2673 but to no avail.
any assistance is appreciated
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David Marshall at dozerboy0157@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com