On Thu, Jan 11, 2018 at 6:07 PM, David Mosley via chirp_users chirp_users@intrepid.danplanet.com wrote:
Hello All,
I have a new B-TECH UV-50x2 and I am using CHIRP to program it. I would like to have the display set up as:
A: Name (2m band) B: Frequency (for A) C: Name (70cm band) D: Frequency (for B)
Is it possible for A to scan 2m only and C to scan 70cm only, or, A&B to scan together and C&D to scan together? If so, what settings to I change in CHIRP to accomplish this?
Thanks so much for your help. 73's David Mosley, LP Of all the roads you take in life, make sure some are DIRT!!!!
Don't retreat, RELOAD!!!!
KG5FAC
You can certainly set the A and C display lines to show names and the B and D display lines to show frequencies. You can also set it up so the A/B and C/D display lines stay automatically synced to the same channels. But you cannot separate 2m and 70cm frequencies. There is only 1 bank of 200 channels and each display line has equal access to them all.
Jim KC9HI