Hi all. I was able to use the 8hp, for some reason Chirp would not program when I selected UV5R. As Jim noted, it seems to be the same firmware but with 3 power levels. Since I was unable to set the power level in chirp, I just edited it on the radio. This worked well, and I was able to program my existing channels I keep on my UV-5R. Thanks everyone for the help!

On Fri, Feb 10, 2017 at 8:21 PM Chance Fulton <chance.fulton@gmail.com> wrote:

I have the same tadio, I use the 8hp setting without issues.

On Feb 10, 2017 8:39 PM, "Todd Nine" <todd.nine@gmail.com> wrote:
Hi all,
I've been using Chirp with my Baofeng UV-5R+, and it works great. I recently purchased a pair of BF-F9V2+ radios. I've attempted to perform Radio -> Download from radio, and select a Baofeng BF-F8HP. This seems to work. However, according to this issue, this specific type of radio should be supported.

http://chirp.danplanet.com/issues/2511

I have the latest nightly, specifically revision 20170210, but this radio is not in my list. I'm using an OS X distribution. Is this the radio option I should be using, or is this radio type missing?

Thanks,
Todd

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chance at chance.fulton@gmail.com

To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Todd Nine at todd.nine@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com