On Tue, May 23, 2023 at 10:36 PM K0LNY glenn@ervin.email wrote:
Well I thought copying and pasting worked, but nothing went into the radio, that is why upload was available. So back to opening the CSV file. And it won't upload. I took out the last entry, which was lower than 30 Mhz. I'll attach my file if you can see what is wrong. Chirp did originally tell me that I had 0.000 in a frequency spot, so I fixed that, but it does not tell me of any errors now, it just won't upload. Thanks.
Glenn
This CSV file loads almost instantly into my Windows 10 Pro 64-bit computer.
You do know that you cannot directly upload a CSV file into a "clone mode" radio, right? You must download from your radio (or load a previously saved CHIRP Radio Images (*.img) file that was created by downloading from your radio) to open a tab that is compatible with your radio. Then you have to copy-and-paste the memory rows from the CSV file tab to the tab from your radio. Once that is done, you can upload the tab from your radio back into your radio.
Jim KC9HI