On Sun, Apr 2, 2017 at 6:14 PM, Jim McIver jmciver@lmtribune.com wrote:
I've been putting kenwood QT/DQT enc in the chirp ToneSql, and where kenwood TX and RX are the same, I still put kenwood QT/DQT enc in ToneSql, but don't know if Tone should be TSQL, None, or Tone.
It is covered in the guides in the link that I provided.
When...
Tone Mode= (None), both the Tone and ToneSql columns are ignored
Tone Mode= Tone, the Tone column is used to specify the TX CTCSS tone and the ToneSql column is ignore (RX is carrier squelch).
Tone Mode= TSQL, the Tone column is ignored and the ToneSql is used to specify the TX/RX CTCSS tone.
If you click View and enable "Hide Unused Fields" then only the selective squelch columns that are being used will have values in them.
Jim KC9HI