You must be an old RTTY man.

RYRYRYRYRYRYRYRY

... Mike, WB4TTZ

-----Original Message-----
From: John Dodd
Sent: Mar 17, 2020 12:35 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] Yaesu

I meant RT System Software... not RY

On Tue, Mar 17, 2020 at 1:34 PM John Dodd <jump12k@gmail.com> wrote:
I recommend everyone use RY Systems Software.... You pay a little for it but it’s well worth the investment...
I Don’t use chirp for my expensive Yaesu....

On Tue, Mar 17, 2020 at 12:33 PM Chance Fulton <chance.fulton@gmail.com> wrote:
I think for Yaesu radios the old ones had to go into clone mode which could cause them to get an image in the wrong format if you pick the wrong thing, or have an unknown firmware. I don't think most newer radios will have this problem unless they take an IMG file and you accidentally pick an IMG from the wrong radio.

On Tue, Mar 17, 2020 at 12:29 PM Nigel A. Gunn G8IFF/W8IFF <nigel@ngunn.net> wrote:
It's never bricked any of mine. I don't believe a word of it.

On 17 March 2020 at 11:52 Dennis Wage <dwage@dwage.com> wrote:

I thought I sent this email the other day but must have started writing it and never sent.

Is there any documented cases of Chirp bricking a radio so badly it had to be sent back for a factory restore.

I see so many Yaesu users bring this up that they're afraid to use Chirp because it will break a radio bad enough to void warranty etc. etc...

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

 

Nigel A. Gunn, ///shoulders.outwards.resolutions   tel +1 937 825 5032
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chance at chance.fulton@gmail.com

To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com


--
Chance Fulton
chance.fulton@gmail.com
810.441.5795
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to JOHN at jump12k@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
John Dodd
Chesapeake Bay
--
John Dodd
Chesapeake Bay