Why do all you linux people run sudo ops, wouldn't it be better to just run the real thing??

(( I really know what it stands for but this thread is long enough now to handle one wise comment, no? ))

------ Original Message ------

To "Discussion of CHIRP" <chirp_users@intrepid.danplanet.com>

Date Wed 1 4 23 08:49:31

Subject Re: [chirp_users] New chirp-next build

Testing here on a Fedora 37 VM with a Yaesu FT-60R. So far, so good.

To get it up and running, I had to do the following.

Downloaded source package and unpacked

Ran 'sudo python setup.py install' in the chirp directory.

Ran 'sudo dnf install python3-wxpython4'

I have run the application and downloaded from the radio successfully.

73, N0EYE, Matt
On Wed, Jan 4, 2023 at 1:51 AM W Paul Mills <ac0hy@wpmills.com> wrote:
When I installed chirp-next, it showed up as 'chirp' not 'chirpw' and was located at '/usr/local/bin/chirp'

On 1/4/23 00:18, K0LNY_Glenn wrote:
When I run that command, I get errors, no Chirp.

Glenn

----- Original Message -----
From: Guy Schlosser

To: Discussion of CHIRP ; David Boucha

Sent: Tuesday, January 03, 2023 10:01 PM

Subject: Re: [chirp_users] New chirp-next build

Even though I didn't get chirp running from the command line, I was able to run it with python3 chirpwx.py while in the source folder. Here's what I found:

Orca is reading menus, and will allow you to open and save files

After opening a known good radio image, Orca announced to me that the memories page had focus, but I was still unable to arrow around and read the various memory values. I was able to export the image to a .csv file, so a good image it definitely was.

That's all I have from the short tinkering I did. Good luck team in 2023.

Thanks,

Guy

On 1/3/23 14:31, David Boucha wrote:
Hi Glenn,

These are the steps I took to install Chirp manually on Ubuntu 22.04

Steps to install Chirp manually on Linux.

1. Make sure you have at least Python 3.7 installed.
A. Type "python" in a command line terminal.
B. Some Linux distros require using "python3". If your distro requires this, please type "python3" anywhere in this document that you see "python"
2. run "pip --version" to see what python version pip is. You may need to run "pip3" if your distro requires you also use "python3".

3. Open a browser and navigate to https://github.com/kk7ds/chirp
4. Click on the green "<> Code" button dropdown.
5. Click on "Download Zip" and save the zip file to your preferred location.
6. My file saved as "chirp-master.zip"
7. Unzip the zip file with the following command:
A. "unzip chirp-master.zip"
8. Change into the resulting chirp-master directory:
A. "cd chirp-master"
9. Pip install Chirp's dependencies:
A. "pip install -r requirements.txt
10. Install Chirp:
A. "python setup.py install"
11. Now you can start chirp by running "chirp" from the command line.

Note: On ubuntu 22.04 you might have to install "python3-wxgtk4.0" before the pip install step.

Let me know if this helps. Orca was able to read me the menu items while I moved around chirp with my arrow keys.

On Tue, Jan 3, 2023 at 11:13 AM K0LNY_Glenn <glenn@ervin.email> wrote:

Hi David,

Actually, a string of stuff that can be written into a bash script would be great, with the preclusion that the user install git first.

So yes, it would be appreciated.

Glenn

----- Original Message -----
From: David Boucha

To: Discussion of CHIRP

Sent: Tuesday, January 03, 2023 11:04 AM

Subject: Re: [chirp_users] New chirp-next build

Hey Glenn,

I just tested running chirp directly from the git repository by installing the dependencies with "pip3 install -r requirements", then running "chirpwx.py" and orca was able to read everything to me. I'm not an expert on orca. I think the navigation worked, but it did seem to work fine.

Let me know if you'd like help running from the git repository.

Best,

Dave

On Tue, Jan 3, 2023 at 8:55 AM K0LNY_Glenn <glenn@ervin.email> wrote:

Well for accessibility, that is for the visually impaired to use Chirp, they will need a Linux using Python 2X, and an old Chirp that will install into it.

Personally, I've not ever gotten a package of Chirp to be able to install right from downloading a Linux package, I rely on using apt to get Chirp from a repository.

I had to follow step by step instruction to get Chirp to install into a newer Linux with Python 3, and I found after all that that flatpak breaks accessibility.

So rather than putting someone through all that, I'm sure there are folks who would gladly download a big file that they can rite to a drive and boot it up and have Chirp working.

Glenn

----- Original Message -----
From: Ken Hansen

To: Discussion of CHIRP

Sent: Tuesday, January 03, 2023 9:00 AM

Subject: Re: [chirp_users] New chirp-next build

Shipping a complete Ubuntu installation in a VM just to have CHIRP pre-installed seems a bit of over-kill. Typically a single line command would install CHIRP, wouldn't it?

CHIRP is 20-40 megabytes, a full GUI install of Ubuntu is measured in gigabytes.

Ken, N2VIP

On Jan 3, 2023, at 06:23, Scott Lopez < scottjl@gmail.com> wrote:

Be aware of Ubuntu's IPRights Policy, particularity concerning redistribution:

https://ubuntu.com/legal/intellectual-property-policy

Yes, installing a 3rd party package (Chirp) and distributing a VM image of it can be considered 'modification'.

On Mon, Jan 2, 2023 at 8:33 PM K0LNY_Glenn <glenn@ervin.email> wrote:

Well if it is the only someone can use Chirp, either for accessibility, or because of operating system, I see nothing wrong with it.

I may DD my thumb drive with Ubuntu and Chirp on it, if I can find a drive with just that on it, and give a link to anyone who wants it.

Some of my thumb drives are multiboot, with several operating systems on it, so I'll need to go through a bunch of them to find one that has Ubuntu 18 and Chirp.

Glenn

----- Original Message -----
From: Scott Lopez

To: Discussion of CHIRP

Sent: Monday, January 02, 2023 7:22 PM

Subject: Re: [chirp_users] New chirp-next build

I can't imagine anyone here wants to be responsible for setting up, distributing, and supporting a VM image of what is now outdated and no longer supported software. I know I wouldn't want to be. There's a reason the software is outdated, the best solution is to keep up.

On Mon, Jan 2, 2023 at 4:03 PM K0LNY_Glenn < glenn@ervin.email> wrote:

What would be handy is to have a VM of Ubuntu with the old Chirp already installed, so that can be implemented.

I am sure I have an old Ubuntu Live on a thumb drive with Chirp on it, but I don't know if that can be made into a VM.

Glenn

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to K0LNY at glenn@ervin.email
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to scottjl@gmail.com at scottjl@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Ken Hansen at ken@n2vip.org
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to K0LNY at glenn@ervin.email
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to UtahDave at boucha@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to K0LNY at glenn@ervin.email
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to UtahDave at boucha@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Guy Schlosser at guyster@bex.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to K0LNY at glenn@ervin.email
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Paul AC0HY at ac0hy@wpmills.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-- 
/**************************************************
* Amateur Radio Station AC0HY                     *
* W. Paul Mills         SN807                     *
* Assistant EC Alpha-1 ARES Shawnee/Wabaunsee, KS *
* President Kaw Valley Amateur Radio Club         *
**************************************************/
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Matt Foster at wedgef5@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com