Would someone please unsubscribe me or remove me from their email lists from these notifications... This message was sent to Marty McInerney at m.mcinerney24@gmail.com

Best,

Marty

On Fri, Jan 6, 2023 at 4:22 PM The Doctor <drwho@virtadpt.net> wrote:

------- Original Message -------

On Friday, January 6th, 2023 at 09:55, K0LNY_Glenn <glenn@ervin.email> wrote:

Another approach is to bevel the four edges with a pocket knife, affectively making the insertion piece a bit smaller, because

 it may not be the flat surface that is the problem, but the outer diameter of the plug

That is what I wound up doing (I used a Dremel and a rattail file) and it solved the problem nicely.

The Doctor [412/724/301/703/415/510]

WWW: https://drwho.virtadpt.net/

The old world is dying, and the new world struggles to be born. Now is the time of monsters.

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Marty McInerney at m.mcinerney24@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com

--

Marty McInerney

Charlotte, NC

704-534-6726

m.mcinerney24@gmail.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Roberto at r.cipriani@cernaia.it
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com