The 7900 doesn't display by band, it displays 4 channels at a time, so you can mix and match what you listen to. What happens if you want to listen to 2 vhf channels at the same time? Your way can't do that. If you want to do it your way, you can just pick whatever channels you want to go where, but you will be limited.

Jardy Dawson

WA7JRD Ham Radio

Message relayed from secret Hillary Clinton server, located in the basement of her house. OOPS, you aren't supposed to know that!

On May 8, 2017, at 07:23, Brewster <brewsterdive@gmail.com> wrote:

I recently purchased a QYT KT 7900D radio and uploaded frequencies to it using the latest version of CHIRP. The problem is that all the frequencies go into all of the four different bands. The radio as described has four "channels", A-D. What I am trying to do is assign the 2 meter band to channel A, the 220 Mhz band to channel B, the FRS/MURS/GMRS frequencies to channel C, and the 440 Mhz band to channel D. Has anyone had any experience with this radio and frequency allotments such as I describe?

Thanks,

Bruce AD8K

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at jardy72@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com