Jim, I'm trying to do the initial " download from radio" per the beginners document so the first radio to pc transfer.
On Sat, Jan 9, 2021, 4:58 PM Jim Unroe rock.unroe@gmail.com wrote:
Hi Mark,
On Thu, Jan 7, 2021 at 10:47 PM Mark Smythe mark.smythe@gmail.com wrote:
Windows 10 using Valley enterprises USB OPC-478 FTDI and installed
recommended drivers. Cable plugged into PC and IC-2100H.
I can not select serial port or radio without the clone window.
Mark
It sounds like you are trying to upload a tab that was not previously downloaded from a radio. You can't go File -> New and try to upload that to a radio. You also can't directly upload a CSV file to any radio. For this reason, the Upload selection would be greyed out if either of these two tab types were selected.
You always have to download first to create a tab that is compatible with your radio. Save the first successful download, unedited, to a CHIRP Radio Images (*.img) file to be kept in a save place as a backup. Then edit a second copy as needed. This tab will be permitted to be uploaded back to the same type of radio that is originally came from.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Mark Smythe at mark.smythe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com