Thank you, Jim,
I got lucky by putting "1" in every cell and that allowed it to change from channel mode to frequency mode.
I'm having issues though trying to load all of my frequencies into the csv file. I followed the instructions to the letter but perhaps I'm putting in invalid data in the file? I only have the freqs and no other data as far as tone and dtcs codes and whatnot. and chirp says it can't find any frequencies and doesn't open the csv file. Is there something else I should be doing?
On Sun, Dec 20, 2020 at 1:56 PM Jim Unroe rock.unroe@gmail.com wrote:
Kevin,
There is a setting the the radio that is out-of-range which is confusing CHIRP and causing the settings tabs to not appear. The issue recently is that the TXP setting in one or both VFO is out-of-range. If this is the case for you, a quick and dirty fix is to switch the radio to VFO mode and temporarily set menu 2 (TXP) to MID in both VFOs. Then download from your radio to see if the "Settings" tab appears. If not, you can email your CHIRP Radio Images (*.img) file to me and I can correct the invalid setting(s) and return the "repaired" image to you.
Jim KC9HI
On Sun, Dec 20, 2020 at 4:34 PM Kevin Evans kevians2001@gmail.com wrote:
I tried the steps in the previously closed solution of downloading the
file and using the Settings tab, then change the setting for VFO. However, I don't have anything under the "settings" tab. I do find VFOA and VFOB under the "browse"r tab on the left, which is under the blank "Settings" tab, but I don't have any info on what to put in Hex, Dec, Bin cells or which ones to use or not use. Any assistance would be appreciated
Kevin _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jim at rock.unroe@gmail.com To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Kevin at kevians2001@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com