Greg,
Here is a good discussion about the various fields in the programming screen, including tone. https://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns
Cheers, Jim
On 2022-06-06 10:28, Gregory Beyer wrote:
Hi, I'm a new amateur so sorry if this seems a dumb question.
For repeaters with only an uplink tone, one simply selects "Tone" in Tone mode and selects the single tone to get into the repeater.
Some repeaters list both an uplink and a downlink tone. In this case, which Tone mode option do I select? And in which property do I enter the downlink tone?
Thank you.
Greg Beyer greg@beyerusa.net
[1]
Drain the Swamp and Restore Local Governance
Links:
[1] http://conventionofstates.com/?ref=67246 _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K2SON at jimmcc@mccorison.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com