Bernhard,
This is a problem only for writing, not reading from radio.
Doesn't make sense to me.
Best wishes,
David N1EA
On Fri, Jan 1, 2021, 20:04 Bernhard Hailer AE6YN ham73tux@gmail.com wrote:
Hi DR,
This looks like a cable / driver / connector issue. Please refer to these Wiki articles: CableGuide CableGuide FTDI OEM Cables
*Linux notes:* Linux generally is quite good with USB to Serial converter drivers. The most likely cause for grief is a connector which doesn't provide good electrical contact. In your case, it looks like serial TX is not making contact. Check your cable and connector.
73 es GL Bernhard AE6YN
On 01-Jan-21 13:17, D.J.J. Ring, Jr. wrote:
I can download from my Yaesu FT-897D successfully using CHIRP daily-20201221 on Linux - Debian GNU/Linux 10 (Python 2.7.16) but I cannot upload.
I get the following error message.
raise errors.RadioError("Failed to communicate with radio: %s" % e) RadioError: Failed to communicate with radio: Radio did not ack block 0
ERROR: ---------------- ERROR: Clone failed: Failed to communicate with radio: Radio did not ack block 0 ERROR: --- Exception Dialog: Failed to communicate with radio: Radio did not ack block 0 --- ERROR: None
Full errors in attachment.
Any suggestions?
73 DR N1EA
chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Bernhard Hailer at ae6yn@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com