I went to the miklor site, my driver shows up as being a supported driver for a FTDI cable which I am using (driver version 2.10.0.0). I tried a different computer and still the same thing. So far I have tried two windows computers, a mac computer, and checked every suggestion I can find on the web (ftdi chip website, miklor etc) and the chirp mailing list. I have rebooted my computer several times. I have even performed a factory reset of the radio. Nothing I have tried has allowed chirp to talk to the radio. I am at a lost as to what could be the problem unless the cable could be bad. I have programmed the radio in the past with the RTSystems cable and software using their opc-478 cable and the icom 1797 cable. That is why I was hoping someone in the raleigh area of NC would happen to have both chirp and the IC-92AD functioning correctly, so I could try their computer and cable to see if it was the radio or if it was my cable and/or computer.
 
Dwayne


On Mon, Apr 21, 2014 at 8:44 PM, Milton <thecanesvenatici@gmail.com> wrote:
Dwayne go to www.miklor.com and take a look at their cable and troubleshooting
guide. You can usually find info there that will actually solve your problem. I've sent
many there and they usually got things sorted out. The Icom 91/92AD is listed in the daily
build as supported so you may have a cable or driver issue. Roughly 80% of communication
issues are driver oriented and Miklor will help you eliminate any driver issue you might have.


On Mon, Apr 21, 2014 at 1:11 PM, Dwayne <drichnews@gmail.com> wrote:
Yes sir I verified the com settings and that the cable is fully seated.

Dwayne

> On Apr 21, 2014, at 11:33, "Brad NK8J" <nk8j@juno.com> wrote:
>
> Did you make sure to set the correct com port in the Chirp program to
> coincide with the port that the cable is attached to  when hooked to the
> computer? Did you also make sure the cable is plugged in all the way?
>
> Brad NK8J
>
> -----Original Message-----
> From: chirp_users-bounces@intrepid.danplanet.com
> [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Dwayne
> Sent: Monday, April 21, 2014 7:22 AM
> To: of CHIRP Discussion
> Subject: [chirp_users] NC Hams using chirp
>
> Any hams in the Raleigh NC area that are using chirp (preferably with Icom
> 92ad) that could help me troubleshoot why I can't program the IC-92ad?
>
> Dwayne
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> ____________________________________________________________
> What is Your Flood Risk?
> Protect your home from floods. Get your flood risk profile today.
> http://thirdpartyoffers.juno.com/TGL3155/535535e0965135de11cbmp03duc
>
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users


_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users