Can you please program your ft757, read the memory back to chirp and then send me this image file? I will investigate on it in a day or two
73 de IZ3GME Marco
On 03/25/2012 03:56 PM, Joseph Skoler wrote:
Further investigation revealed that the CTCSS tone in the chirp program is set correctly, but when I upload the memories to the rig, the rig has the PL tone set to "VHF-"
What does that mean and how do I correct it?
*From:* Joseph Skoler jrskoler@yahoo.com *To:* "chirp_users@intrepid.danplanet.com" chirp_users@intrepid.danplanet.com *Sent:* Sunday, March 25, 2012 9:51 AM *Subject:* [chirp_users] 857D problem
Hi,
I just installed Chirp to program my new 857D. The interface/cable is working fine -- able to download/upload memories to/from the radio.
My problem is that none of the UHF/VHF memories work on the rig if they're programmed using Chirp.
That is, they're in memory and I can receive on them just fine. But, transmitting does not appear to work -- cannot key up the repeaters.
I have quadruple checked the offset direction/amount as well as the PL.
The 10 meter memory entries work fine.
I have an SWR meter on the HF antenna port and it moves a tiny amount when I'm transmitting on a memory channel programmed to a VHF or UHF frequency, as if it's putting the signal out the HF port.
When I program the memories manually everything works fine.
What am I doing wrong?
thank you,
Joseph, kc2yu
chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users