Hi Tom,
I don't have Windows 8.1 here so I can test it out myself. Are you not able to choose the older compatible driver in the 8.1 Device Manager like is shows in step 11?
Jim KC9HI
On Sat, Dec 6, 2014 at 1:36 PM, Tom Maynard tom.wz9u@gmail.com wrote:
On 06-Dec-14 09:15, Shon Edwards wrote:
This is a very good explanation and should work fine. I usually just use the "official" cables myself and have no problem, so this is another option in case things don't pan out.
I just went through this process for the first time myself, just last night. Both my radio and my programming cable came from Banggood (China).
After a bit of struggling I got my systems communication smoothly. My configuration:
Laptop: Windows 8.1 Radio Baofeng UV-82
I did try using the USB cable driver that came with Windows and it did not work. I downloaded the drivers from the Miklor site and they also did not work. As a last resort I used the drivers from the mini-disc supplied with my cable. Again: No luck at all.
Then I realized that Windows was automatically updating the USB cable driver the instant I plugged in the cable.
I discovered this by drilling down deep within Device Manager and looking at the Date/Version of the installed driver. As soon as the cable was inserted (with or without radio connected), Windows upgraded the driver instantly (Fail).
The solution for me — and YMMV, of course — was to re-enter Device Manager and to click on the “Roll Back Driver” button, after assuring the O/S that this was in fact my intention the driver reverted to the one that I had installed. Immediately thereafter everything was golden and CHIRP worked perfectly.
I confess that it took me close to an hour to realize, diagnose, and correct the problem but I got mine working.
Thereafter I went back to the CHIRP Wiki page with the hope of being able to edit in my Windows 8 approach (since Win8 isn’t specifically mentioned there). Alas, although it is a Wiki page, I found no way to edit it — despite having registered/authenticated.
Instead, I post this here, hoping it will help someone. I can provide more detailed info, even a step-by-step procedure, if someone with Write authority on the Wiki would publish it there.
Tom Maynard WZ9U
P.S. I am actually using the driver that came with my cable on the mini-disc. I'm sure the download from Miklor would also work, but once I had a working solution I opted not to experiment further. (If it ain't broke, right?)
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users