I just got a Baofeng UV-5R from Amazon. It shows Firmware Version BFB298
I’m using the FTDI cable for my Wouxun KG-UV3D to program it.
The Baofeng OEM software Reads and writes fine to the radio with this cable.
Chrip 03/14/19 gives the following error “Radio refused to send second block 0x1f00”
Any ideas as to what may be going on here
Todd
AD7VB
Sent from Mailhttps://go.microsoft.com/fwlink/?LinkId=550986 for Windows 10
From: chirp_users-request@intrepid.danplanet.commailto:chirp_users-request@intrepid.danplanet.com Sent: Saturday, March 16, 2019 12:04 PM To: chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com Subject: chirp_users Digest, Vol 123, Issue 16
Send chirp_users mailing list submissions to chirp_users@intrepid.danplanet.com
To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request@intrepid.danplanet.com
You can reach the person managing the list at chirp_users-owner@intrepid.danplanet.com
When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..."
Today's Topics:
1. Re: chirp-daily yaesu ft-991 not present (Dennis Wage)
----------------------------------------------------------------------
Message: 1 Date: Fri, 15 Mar 2019 14:38:50 -0500 From: Dennis Wage dwage@dwage.com Subject: Re: [chirp_users] chirp-daily yaesu ft-991 not present To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID: CAE1d060TRiQRzAE9_dHtT01gyBboEfiPdkdXLZ2ROpH-N6K-aQ@mail.gmail.com Content-Type: text/plain; charset="utf-8"
I think what he meant was: my problem is now the chirp for program the Yaesu FT-991 via Cat ( USB-USB ), under Windows 10 with RMS Software no problem,
This means he has used the 991 with RMS with the USB to USB cable showing us that it works.
in the actual chirp version i did not can choose the FT-991 from the dropdown list.
This means he can't choose it because it's not there.
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net
On Fri, Mar 15, 2019 at 12:24 PM Dan Clemmensen danclemmensen@gmail.com wrote:
Amerigo, I don't completely understand your question. CHIRP is not a subsisitute for RMS (Winlink) software. Instead, CHIRP replaces or augments the Yaesu programming software for for your radio. You can possibly (probably) run your RMS Windows software on your Linux Mint system by running it under Wine, and you can almost certainly run the Yaesu software under Wine.
If you are asking about support for the FT-991 within CHIRP, then sorry, it's not there. CHIRP is Open Source software written entirely by unpaid volunteers who like to program and who like Ham radio. Each radio type needs to be separately analysed and a driver program written for it. The volunteer will need physical access to a radio to perform the analysis, and will need an absolute minimum of (say) 10 hours of work. A volunteer who can do this in 10 hours can probably make more than $200/hr on a paid contract, so clearly this must be a "labor of love". Mere mortals will take longer than 10 hours. My guess is that in general a volunteer might program a CHIRP driver for a radio that they have chosen to use themselves, but are less likely to program for some random new radio unless there is a change that the new radio turns out to just need a minor modification or adaptation of an existing driver.
Speaking personally, I am a new CHIRP developer (and a new Ham). I purchased a Yeasu FT-4 before I had even heard of CHIRP, and was unhappy because I later discovered that CHIRP would be highly desirable in my application but the radio was unsupported. So, I wrote a CHIRP driver for it, and incidentally also for the FT-65, since they are very, very similar. It's been a whole lot of fun, but it took multiple weeks of effort. From a purely financial perspective, it would have made far more sense to just buy a supported radio or even go out and get a 1-week programming gig and then go buy an even more expensive radio.
If you have any programming experience, Please consider trying to write a driver. It's really quite fun. Even if you don't have programming experience, you might want to try to do an initial analysis if the protocol, using some variation of the techniques described at : https://chirp.danplanet.com/projects/chirp/wiki/DevelopersAdd_a_Radio
On Thu, Mar 14, 2019 at 10:51 PM americo aldighieri americo@aldighieri.ch wrote:
dear all,
my name is amerigo, my QTH ist Tuggen / Switzerland. Ing. Informatic and Electronic
since 2 week all my systems are running under Linux Mint 19.1 , so far , so good.
my problem is now the chirp for program the Yaesu FT-991 via Cat ( USB-USB ), under Windows 10 with RMS Software no problem, in the actual chirp version i did not can choose the FT-991 from the dropdown list.
is there anybody, who can help me?
Asus Z87-Pro MB with 32GB RAM, Quadcore Intel i47xx, 120GB SSD and more
Linux Mint Version 19.1 with latest patches installed
the command "lsusb" show that the Cygnal Integrated Product CP210x UART Bridge succesfully activ with Device 014
best regards from tuggen amerigo , hb9gii , 73 _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan Clemmensen at danclemmensen@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Wage at dwage@dwage.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com