Understood, but they are the same release numbers, so that should not be an issue

On Aug 2, 2013 7:01 AM, <chirp_users-request@intrepid.danplanet.com> wrote:

Send chirp_users mailing list submissions to
chirp_users@intrepid.danplanet.com

To subscribe or unsubscribe via the World Wide Web, visit
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
or, via email, send a message with subject or body 'help' to
chirp_users-request@intrepid.danplanet.com

You can reach the person managing the list at
chirp_users-owner@intrepid.danplanet.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of chirp_users digest..."

Today's Topics:

1. Re: Uv5r not being programmed with additional settings
(John LaMartina)
2. Re: Uv5r not being programmed with additional settings (Jim Unroe)

----------------------------------------------------------------------

Message: 1
Date: Fri, 2 Aug 2013 09:53:57 -0400
From: "John LaMartina" <JohnLa@usa.net>
Subject: Re: [chirp_users] Uv5r not being programmed with additional
settings
To: "'Discussion of CHIRP'" <chirp_users@intrepid.danplanet.com>
Message-ID: <002401ce8f87$bc926230$35b72690$@net>
Content-Type: text/plain; charset="us-ascii"

Robert,

This is by design. It only occurs when the UV5R radios have different firmware releases.

The only parameters that will not transfer are those in the Settings / Other Settings tab.

Everything else should transfer properly.

Due to the many firmware releases with the UV5R, this allows you to use the same image file to update multiple radios without
requiring a separate .img file for each.

The Settings / Other Settings tab mainly changes the Power On Messages which normally remain constant.

Hope this helps.

John K3NXU

http://www.miklor.com/uv5r

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of ima Ham
Sent: Friday, August 02, 2013 9:24 AM
To: chirp_users@intrepid.danplanet.com
Subject: [chirp_users] Uv5r not being programmed with additional settings

When I program my uv5R, it transfers all frequencies and additional settings. I have a second UV 5 R and when I upload everything to
that, it only transfers the frequencies, and not the additional settings. I've researched the error and have still not been able to
correct it.

Can someone explain if it is possible to correct this?

Robert
KK4SEY
Miami

On Aug 1, 2013 12:00 PM, <chirp_users-request@intrepid.danplanet.com> wrote:

Send chirp_users mailing list submissions to
chirp_users@intrepid.danplanet.com

To subscribe or unsubscribe via the World Wide Web, visit
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
or, via email, send a message with subject or body 'help' to
chirp_users-request@intrepid.danplanet.com

You can reach the person managing the list at
chirp_users-owner@intrepid.danplanet.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of chirp_users digest..."

Today's Topics:

1. Re: Bootable Chirp CD & Thumb-drive (Jeff Melton)
2. Re: Bootable Chirp CD & Thumb-drive (Tom Morris)
3. Re: Bootable Chirp CD & Thumb-drive (David Evans)

----------------------------------------------------------------------

Message: 1
Date: Wed, 31 Jul 2013 18:17:10 -0500
From: Jeff Melton <W5JNM@ARRL.net>
Subject: Re: [chirp_users] Bootable Chirp CD & Thumb-drive
To: chirp_users@intrepid.danplanet.com
Message-ID: <51F99AF6.2000109@ARRL.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Sorry to chase this rabbit trail, but my search of the wiki
<http://chirp.danplanet.com/projects/chirp/wiki/Home> for the procedure
you mention didn't return any results. Can someone kindly point this
n00b in the right direction?

Jeff
W5JNM -at- ARRL

On 7/30/13 11:14 PM, chirp_users-request@intrepid.danplanet.com wrote:
> Message: 7
> Date: Tue, 30 Jul 2013 20:30:46 -0600
> From: David Evans<kd7uch@gmail.com>
> Subject: Re: [chirp_users] Bootable Chirp CD & Thumb-drive
> To: Discussion of CHIRP<chirp_users@intrepid.danplanet.com>
> Message-ID:
> <CAOFT+78F7iJBmt+eXtmAw_rk_Et79X+-iZ2gqENRWnRC5RT6UA@mail.gmail.com
<mailto:CAOFT%2B78F7iJBmt%2BeXtmAw_rk_Et79X%2B-iZ2gqENRWnRC5RT6UA@mail.gmail.com> >
> Content-Type: text/plain; charset="iso-8859-1"
>
> Jim,
> That is the way I crested mine. It is the procedure described in the wiki.
>
> Thanks,
> David
>
> kd7uch@arrl.net

------------------------------

Message: 2
Date: Thu, 1 Aug 2013 13:15:30 -0400
From: Tom Morris <blueneon@gmail.com>
Subject: Re: [chirp_users] Bootable Chirp CD & Thumb-drive
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Message-ID:
<CAEZ7Lt151U3weyVA9B4p+aO5eSPCunHifxGPe-tmDOgsWVxaRg@mail.gmail.com
<mailto:CAEZ7Lt151U3weyVA9B4p%2BaO5eSPCunHifxGPe-tmDOgsWVxaRg@mail.gmail.com> >
Content-Type: text/plain; charset="iso-8859-1"

If a fake flash drive is a concern, use H2TestW as mentioned here.
http://fightflashfraud.wordpress.com/2008/11/24/h2testw-gold-standard-in-detecting-fake-capacity-flash/

If the drive's good, it should work with no errors. If it's burned with a
fake capacity, it'll let you know what the real capacity was.

Also, if the drive is not fake but has a defect, it'll catch that too. I
have had several Sandisk MicroSD cards go bad and H2TestW reminds me that
the corruption problems aren't my fault, it's the card's... zowie!

On Wed, Jul 31, 2013 at 7:17 PM, Jeff Melton <W5JNM@arrl.net> wrote:

> Sorry to chase this rabbit trail, but my search of the wiki
> <http://chirp.danplanet.com/projects/chirp/wiki/Home> for the procedure
> you mention didn't return any results. Can someone kindly point this
> n00b in the right direction?
>
> Jeff
> W5JNM -at- ARRL
>
> On 7/30/13 11:14 PM, chirp_users-request@intrepid.danplanet.com wrote:
> > Message: 7
> > Date: Tue, 30 Jul 2013 20:30:46 -0600
> > From: David Evans<kd7uch@gmail.com>
> > Subject: Re: [chirp_users] Bootable Chirp CD & Thumb-drive
> > To: Discussion of CHIRP<chirp_users@intrepid.danplanet.com>
> > Message-ID:
> > <
> CAOFT+78F7iJBmt+eXtmAw_rk_Et79X+-iZ2gqENRWnRC5RT6UA@mail.gmail.com
<mailto:CAOFT%2B78F7iJBmt%2BeXtmAw_rk_Et79X%2B-iZ2gqENRWnRC5RT6UA@mail.gmail.com> >
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > Jim,
> > That is the way I crested mine. It is the procedure described in the
> wiki.
> >
> > Thanks,
> > David
> >
> > kd7uch@arrl.net
>
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>

--
--
Tom Morris, KG4CYX
Mad Scientist and Operations Manager, WDNA-FM 88.9 Miami - Serious Jazz!
Engineer, WRGP Radiate FM, Florida International University
786-228-7087
151.820 Megacycles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130801/dd6e34d8/attachment-0001.html

------------------------------

Message: 3
Date: Thu, 1 Aug 2013 11:32:38 -0600
From: David Evans <kd7uch@gmail.com>
Subject: Re: [chirp_users] Bootable Chirp CD & Thumb-drive
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Message-ID:
<CAOFT+79CPnVpbPk0HH0oMvpU0A1czqNQDLddWjp3XvWG=phhBA@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Thanks, Tom. I will have to check that. I don't know much about the fake
drives and what you might get if you buy a drive from a discount house but
that could very well be my problem. I will also try with a different
thumb-drive.

On Thu, Aug 1, 2013 at 11:15 AM, Tom Morris <blueneon@gmail.com> wrote:

> If a fake flash drive is a concern, use H2TestW as mentioned here.
> http://fightflashfraud.wordpress.com/2008/11/24/h2testw-gold-standard-in-detecting-fake-capacity-flash/
>
> If the drive's good, it should work with no errors. If it's burned with a
> fake capacity, it'll let you know what the real capacity was.
>
> Also, if the drive is not fake but has a defect, it'll catch that too. I
> have had several Sandisk MicroSD cards go bad and H2TestW reminds me that
> the corruption problems aren't my fault, it's the card's... zowie!
>
>
> On Wed, Jul 31, 2013 at 7:17 PM, Jeff Melton <W5JNM@arrl.net> wrote:
>
>> Sorry to chase this rabbit trail, but my search of the wiki
>> <http://chirp.danplanet.com/projects/chirp/wiki/Home> for the procedure
>> you mention didn't return any results. Can someone kindly point this
>> n00b in the right direction?
>>
>> Jeff
>> W5JNM -at- ARRL
>>
>> On 7/30/13 11:14 PM, chirp_users-request@intrepid.danplanet.com wrote:
>> > Message: 7
>> > Date: Tue, 30 Jul 2013 20:30:46 -0600
>> > From: David Evans<kd7uch@gmail.com>
>> > Subject: Re: [chirp_users] Bootable Chirp CD & Thumb-drive
>> > To: Discussion of CHIRP<chirp_users@intrepid.danplanet.com>
>> > Message-ID:
>> > <
>> CAOFT+78F7iJBmt+eXtmAw_rk_Et79X+-iZ2gqENRWnRC5RT6UA@mail.gmail.com
<mailto:CAOFT%2B78F7iJBmt%2BeXtmAw_rk_Et79X%2B-iZ2gqENRWnRC5RT6UA@mail.gmail.com> >
>> > Content-Type: text/plain; charset="iso-8859-1"
>> >
>> > Jim,
>> > That is the way I crested mine. It is the procedure described in the
>> wiki.
>> >
>> > Thanks,
>> > David
>> >
>> > kd7uch@arrl.net
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users@intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>
>
>
>
> --
> --
> Tom Morris, KG4CYX
> Mad Scientist and Operations Manager, WDNA-FM 88.9 Miami - Serious Jazz!
> Engineer, WRGP Radiate FM, Florida International University
> 786-228-7087
> 151.820 Megacycles
>
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>

--
Thanks,
David
kd7uch@arrl.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130801/e5575960/attachment-0001.html

------------------------------

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

End of chirp_users Digest, Vol 56, Issue 1
******************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130802/1a785c77/attachment-0001.html

------------------------------

Message: 2
Date: Fri, 2 Aug 2013 10:00:35 -0400
From: Jim Unroe <rock.unroe@gmail.com>
Subject: Re: [chirp_users] Uv5r not being programmed with additional
settings
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Message-ID:
<CADnO8U53w+N2dgztveyV1RB=tTxE===YRDJXAu0dEwz0jXYL9A@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

On Fri, Aug 2, 2013 at 9:24 AM, ima Ham <kk4sey@gmail.com> wrote:

> When I program my uv5R, it transfers all frequencies and additional
> settings. I have a second UV 5 R and when I upload everything to that, it
> only transfers the frequencies, and not the additional settings. I've
> researched the error and have still not been able to correct it.
>
> Can someone explain if it is possible to correct this?
>
> Robert
> KK4SEY
> Miami
>
> Robert,

Your two radios have different firmware versions. When the firmware version
of the CHIRP image that you are uploading is different than the firmware
version in the radio you are uploading it to, CHIRP stops short of
transferring the 'Other Settings'. I wish the message that is returned
could be toned down a bit. It needs look less like an error message and
look more like and FYI. Anyway, this is the way CHIRP is designed to
behave. Most of the 'settings' of the radio are transferred. It is only the
settings on the 'Other Settings' menu that aren't uploaded.

Transferring the 'Other Settings' to a radio that has a different firmware
version than the radio it was originally downloaded from, can cause
unwanted issues with the radio. This is because the memory layout changed
when Baofeng released firmware version BFB291.

Most of the time, you don't want the 'Other Settings' changed anyway. If
you do, upload the settings. Close the notification that the 'Other
Settings' weren't transferred. Download the settings from the radio. Tweak
the 'Other Settings'. Upload the settings back to the radio.

Jim KC9HI
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130802/921117d0/attachment.html

------------------------------

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

End of chirp_users Digest, Vol 56, Issue 3
******************************************