If you have an FT-1802, give it a try with Chirp's FT-1802M driver. I wrote it and I only had an FT-1802M to test it with. I can't tell you if the FT-1802 is any different because I've never touched one. They could be exactly the same.
What I would do to test it is manually enter a few memory channels in the FT-1802. Then download into Chirp and make sure those channels are where they're supposed to be (channel 1 is channel 1, etc.) and that all the frequencies and tones are correct. If it all looks good then there's probably no change to the memory layout between FT-1802 and FT-1802M.
Tom KD7LXL
On Thu, Feb 2, 2017 at 6:00 PM, clowery@va.net clowery@va.net wrote:
can not get chirp to read my FT-1802 is there a difference between it and a 1802M?
NM4V _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KD7LXL at esarfl@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com