3 May
2016
3 May
'16
3:17 p.m.
On Tue, May 3, 2016 at 3:08 PM, Aubrey Turner aubrey.c.turner@gmail.com wrote:
If you could somehow get the FTDI driver to recognize the RATOC-specific IDs, you might have a chance. But as far as I can tell, no one as done this.
The other option is reprogramming the cable to report the generic FTDI VID/PID instead of the RATOC-specific VID/PID. That method is described here: http://chirp.danplanet.com/projects/chirp/wiki/CableGuide_FTDI_OEM_Cables#Ch...
Now the standard FTDI driver will recognize it.
You can reprogram it back when you're done. (Don't forget to write down the original values!)
Tom KD7LXL