Radio Not Responding is usually caused by the cable not being FIRMLY seated into the radio. Push hard on the connector and make sure it has "snapped" in. If that doesn't solve it, try squeezing/holding  the connector into the radio with one hand while the program is trying to read from the radio.

On Fri, Jul 8, 2016 at 8:49 AM, Gary Runningbear <runningbear2000@gmail.com> wrote:

Yup, got that.

On Jul 8, 2016 08:07, "David Buss" <kd9ebr@gmail.com> wrote:
If it is the prolific chip, make sure you are using the older driver 3.2

-----Original Message-----
From: Gary Runningbear <runningbear2000@gmail.com>
To: kc6iih <kc6iih@aol.com>, Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Sent: Fri, 08 Jul 2016 6:47
Subject: Re: [chirp_users] Driver

Thanks, Herb, I have it all working now except that it says now that the radio is not responding. This all works perfectly on my laptop so I know the radio and cable are okay. I wonder if there is a glitch with Win 10. My laptop runs Vista.

On Jul 8, 2016 01:19, "Jock via chirp_users" <chirp_users@intrepid.danplanet.com> wrote:

The link also works for me.

Jock Soutar    KC6IIH
Sent via  Samsung Galaxy S7
on  AT&T  4G LTE Smartphone

On Thursday, July 7, 2016 Herb Gerhardt <hgerhardt@wavecable.com> wrote:

Comes up fine here by just clicking on the link.

 

Try it again if it still does not come up, try it again later.  Link appears to be good.

 

Herb

 

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Gary Runningbear
Sent: Thursday, July 07, 2016 8:52 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] Driver

 

I got "page not found".

Thanks for the info. I appreciate it!

On Jul 7, 2016 23:45, "Herb Gerhardt" <hgerhardt@wavecable.com> wrote:

Go to   http://www.miklor.com/COM/UV_Drivers.php

 

 

Herb, KB7UVC

NW APRS Group, West Sound Coordinator

Our WEB Site:  http://blog.nwaprs.info/ 

 

 

 

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Gary Runningbear
Sent: Thursday, July 07, 2016 8:41 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] Driver

 

Uv 82 and profile cable. Sorry.

On Jul 7, 2016 23:39, "W Paul Mills" <AC0HY@wpmills.com> wrote:

Need more information. What radio, what cable?

On 07/07/2016 10:28 PM, Gary Runningbear wrote:
> I just picked up a win 10 tablet. I have chirp up and running but I
> need the driver for the programming cable and I forgot where to get
> it. Can someone help? Thanks, Gary N8GPZ
>


--
/*************************************************
* Amateur Radio Station AC0HY                    *
* W. Paul Mills         SN807                    *
* Assistant EC Alpha-1 ARES Shawnee/Wabunsee, KS *
* President Kaw Valley Amateur Radio Club        *
*************************************************/

 

Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com

 


_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Gary at runningbear2000@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com



Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com


_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jock at kc6iih@aol.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Gary at runningbear2000@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Gary at runningbear2000@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to John Wuest at jhwuest@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com