I had the same issue with my QYT KT-8900. I used the
Sainsonic 890 radio setting and everything uploaded with no problem.
Get Outlook
for Android
I am not familiar with that radio but learned that my F8HP
needs to be in Frequency mode vs Channel mode. Might be worth a look?
I am not familiar
with that radio but learned that my F8HP needs to be in Frequency mode
vs Channel mode. Might be worth a look?
Make sure that
the Device Manager shows that the port is working properly. It also
shows which port to use.
Download the latest CHIRP software. My
KT8900 is now working properly with CHIRP. CHIRP daily-20160507 is what
I am using.
I get the same message
with my 8900.
I have not been able to successfully read
from my QYT KT-8900 radio I consistently receive the following message
‘An error has occurred’ ‘Radio identification failed.’ Note that this
is with two different cables (one supplied with radio requiring older
Prolific driver, and the other a brand new BTECH cable that I used
without error to program my BTECH UV-2501+220). I am using the latest
version of CHIRP (daily-20160507) build on a Windows 10 x64 system.
Frank
Ketterman
AC0XV
Molon
Labe!
_______________________________________________
chirp_users
mailing list
chirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_usersThis
message was sent to Paul Mann at
pauledmann@yahoo.comTo
unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com I have not been able to successfully read from my QYT
KT-8900 radio I consistently receive the following message ‘An error has
occurred’ ‘Radio identification failed.’ Note that this is with two
different cables (one supplied with radio requiring older Prolific
driver, and the other a brand new BTECH cable that I used without error
to program my BTECH UV-2501+220). I am using the latest version of
CHIRP (daily-20160507) build on a Windows 10 x64 system.
Frank
Ketterman
f.ketterman@mail.com
www.survivalblog.net
AC0XV
Molon
Labe!