On May 16, 2016 08:57, "Pavel Milanes (CO7WT)" pavelmc@gmail.com wrote:
Hi Tim and everybody,
I had a lot of work recently and was away for a while... and now I'm
paying attention to the new variants of the mobile QYT/BTECH/Juentai/Sainsonic etc mobiles that are growing like grass in the spring. (I'm in change of the communication procedures for that also...)
I will revisit the Kenwood TK-760 driver as soon as I can get free time,
sorry for the delay on solving this.
Thanks for all that you and the other developers do!! I am in no big hurry.
El 15/05/16 a las 03:27, Tim Billingsley escribió:
I have a couple of old Kenwood TK-762H transceivers. I see the issue on
http://chirp.danplanet.com/issues/3139 but I seem to be having troubles. When I attempt to read from the radio using TK-762G it appears to read from the radio then dumps the error dialog "An error has occurred: The radio doesn't accept program mode"
ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238,
in run
self.__radio.sync_in()File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line
884, in sync_in
self._mmap = do_download(self)File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line
517, in do_download
_open_radio(radio, status)File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line
478, in _open_radio
raise errors.RadioError("The radio doesn't accept program mode")RadioError: The radio doesn't accept program mode
ERROR: ---------------- ERROR: Clone failed: The radio doesn't accept program mode ERROR: --- Exception Dialog: The radio doesn't accept program mode --- ERROR: None
ERROR: ----------------------------
If I attempt using TK-760 chirp attmpts to read and almost immediately
dumps the error dialog saying "An error has occurred Radio refuse to enter into program mode after a few tries"
ERROR: ---------------------------- ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238,
in run
self.__radio.sync_in()File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line
411, in sync_in
self._mmap = do_download(self)File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line
255, in do_download
open_radio(radio)File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line
227, in open_radio
raise errors.RadioError(msg)RadioError: Radio refuse to enter into program mode after a few tries
ERROR: ---------------- ERROR: Clone failed: Radio refuse to enter into program mode after a few
tries
ERROR: --- Exception Dialog: Radio refuse to enter into program mode
after a few tries ---
ERROR: None
ERROR: ----------------------------
FWIW I am running CPU~Dual core AMD E2-1800 APU with Radeon HD Graphics (-MCP-) speed~1700
MHz (max)
Kernel~4.2.0-34-generic i686 Mem~2035.9/3635.1MB HDD~750.2GB(35.9% used) Ubuntu 15.10 CHIRP daily-20160513 GTK 2.24.28 PyGTK 2.24.0 Python 2.7.10
I am also having issues with a QTY KT8900 I have tried to follow all this has been discussed on
http://chirp.danplanet.com/issues/2673 but to no avail.
any assistance is appreciated
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to M.Sc. Pavel Milanes Costa at pavelmc@gmail.com To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tim at kd5ckp@gmail.com To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com