Yes, it is a known good cable. Used on another baofeng recently. I have tried all the baofeng models and radioditty models. For some it says Error reading data from radio: Not the amount of data we want. or it says Clone failed: Radio did not ack the programming mode. or it says (for most) Clone failed: Radio did not respond.
I was running chirp launched from the command line so I have the messages, but it does not always show which driver/model was being tried.
The messages are similar regardless of using chirp legacy (flatpak) or chirp-next.
Sorry, but I noticed that I forgot to show that I am using linux (Fedora 37 with python 3.11) for chirp-next released 20230309 or the legacy flatpak 20221217 Jeff KI7GJG
On Fri, Mar 10, 2023 at 3:52 PM Ken Hansen ken@n2vip.org wrote:
I see three models of UV-82 (UV-82, UV-82HP, UV-82WP), I assume you tried all 3, correct?
What does chirp do when you try to read the radio? What is the error message?
Is this a known-good programming cable?
Are you certain the radio isn't receiving a signal while trying to read from it? (Remove antenna, choose a 'quiet' channel, etc)
Ken, N2VIP
On Mar 10, 2023, at 15:39, Jeffrey Vian sandhillsinvestment@gmail.com
wrote:
I have a new baofeng that was just given to me. The radio is UV-82L and was purchased by my ARC 2 or 3 years ago and
programmed using chirp at that time.
I wanted to update the programming but have not been able to do so with
either chirp-next or the legacy chirp that is on the download site.
The individual that originally programmed it does not remember which
type of radio he used for the original programming.
So far I have tried every supported baofeng model and the radioddity
models as well but none are able to download the existing programming so it could be modified and updated.
Does anyone have a clue if chirp is even able to communicate with this
radio today? and if so then what brand/model should be used to do so? The club still has several of these that are used as door prizes and for club use.
Jeff KI7GJG
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken Hansen at ken@n2vip.org To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email
chirp_users-owner@intrepid.danplanet.com
Searchable archive:
https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to sandhillsinvestment@gmail.com at sandhillsinvestment@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com