Hi Rich: Thanks for the suggestion. I tried seating te cable as snugly as I can Even reamed out the apertures in the radio_casing but all to no vail. I would like to open up the radio and see how well the contacts are made. I have no tools here (not even a multitester, visiting Hyderabad,India). In two weeks I will be back in the great white north, then I can fiddle with it :-) regardsharsha godavari ----- Original Message ----- From: Rich Messeder rich.messeder@gmail.com To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Sent: Sun, 08 Jan 2017 15:00:24 -0700 (MST) Subject: Re: [chirp_users] New Daily Build
Greetings Harsha, When I first started w the Baofeng, I had cable trouble. I was advised to make sure that the connector to the radio was well seated. I checked it and it seemed fine. After several failed attempts, I took special care to see how well it seated, and found that it really must be /firmly/ pushed in to be fully seated. Since then, no problems with several releases of CHIRP.
~R~ NE1EE Rich Messeder Short email? No html? Here's why: http://emailcharter.org/
On 2017-01-08 10:30:-0700, Harsha Godavari wrote:
Thank you. Downloaded the 0161018 version and received the message, "An error occurred Radio did not respond".
Somewhere there was a suggestion that the programming cable might need some surgery ! At this point I don't feel brave enough :-)
Regards harsha godavari
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to h.godavari@shaw.ca at h.godavari@shaw.ca To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com