Al,
Are you using the same USB port that you currently use for the Baofeng? I recently helped a friend with his 9800, and I use a baofeng. If you have the 3.2.0.0 installed and using on a certain port. Try using the TYT cord on that same port.
Todd Bloomingdale-KC9LOX
Tomah, WI
On Tue, Sep 15, 2015 at 11:39 AM, alfredmjones@yahoo.com al@aljones.us wrote:
I need some ideas here. I have a Baofeng UV82L that I program with Chirp and have no problem cloning this for the various UV5? radios that people have around here. I'm comfortable with Chirp.
Recently purchased a TYT 9800; I have no problem programming that from the front panel, but I'm a computer junky and it's normally easier to enter / fix radio data programmatically.
Running Windows 10, updated; have a cable that claims to be a TYT (the label on the cable); when plugged in device manager reports "Unknown USB Device (Device Descriptor Request Failed)"
The Prolific 3.2.0.0 driver announces itself as being available on com 4 when the Baofeng cable is plugged in; however I see no com ports available for the TYT - I have not been able to get either the driver that came with the disk or the one available fro Grapevine (retailer in Dallas) to install.
Any comments / suggestions would be appreciated. I'm at a loss.
//al
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com