I just wish you can call someone at cheer up when you need help
Get Outlook for iOShttps://aka.ms/o0ukef ________________________________ From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com on behalf of Larry Lovell larry.lovell76@gmail.com Sent: Wednesday, June 5, 2019 9:04:45 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Second Attempt cant program my radio
See if this helps: https://www.qrvtronics.com/CatHAM_Radio/files/UsingCHIRPorOtherSoftware.pdf Larry, N7RGW
On Wed, Jun 5, 2019 at 7:22 PM Jim Unroe <rock.unroe@gmail.commailto:rock.unroe@gmail.com> wrote: On Wed, Jun 5, 2019 at 8:59 PM Glenn At Home <glennervin@cableone.netmailto:glennervin@cableone.net> wrote:
Which operating system are you using, and which com port/USB port did you select?
From: gearjam@ken-tennwireless.commailto:gearjam@ken-tennwireless.com Sent: Wednesday, June 05, 2019 7:52 PM To: chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com Subject: [chirp_users] Second Attempt cant program my radio
I bought $20.00 program cable from Amazon. Had to download driver CDM v2.12.28 WHQL Certified. Downloaded CHIRP UV82S35. When I click on "Read data from radio" a small window opens that says "Read data from radio" with three tabs, "Read", "Cancel" and "Help". When I click on Read I get another small window that says "Operation Prompt" with the message "! Fail connect with transceiver". When I click on Help nothing happens. Cable is firmly plugged into radio to the second click. Tried dampening the pins for a better connection as per the Baofeng instructions. I've also tried the radio on both channel mode and frequency mode. Checked Miklor.com to no avail. I accidently keyed the PPT button and heard a buzz from my computer speakers so I believe I have a connection with the cable. Any advice??????? Steve Prime
Hi Steve,
You still don't have a working connection between the radio and computer. Follow the instructions on miklor.comhttp://miklor.com to determine which device driver is install and which COM port number has been assigned to the programming cable and report back.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Larry Lovell at larry.lovell76@gmail.commailto:larry.lovell76@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.commailto:chirp_users-unsubscribe@intrepid.danplanet.com
-- Larry Lovell 73's N7RGW http://QRVTronics.comhttp://qrvtronics.com Cell: 214-697-1729