Folks,

I invoked Chirp in a console as soon as I ask it to talk to the radio I get this:

WARNING: Bandplan North American Band Plan has duplicates [1800000-2000000 160 Meter Band simplex , 1800000-2000000 160 Meter Band simplex mode: CW ]

WARNING: Bandplan North American Band Plan has duplicates [1800000-1810000 Digimodes simplex , 1800000-1810000 Digital Modes simplex ]

WARNING: Bandplan North American Band Plan has duplicates [1999000-2000000 Beacons simplex mode: CW , 1999000-2000000 Beacons simplex ]

WARNING: Bandplan North American Band Plan has duplicates [3500000-4000000 80 Meter Band simplex , 3500000-4000000 80 Meter Band simplex ]

WARNING: Bandplan North American Band Plan has duplicates [7000000-7300000 40 Meter Band simplex , 7000000-7300000 40 Meter Band simplex ]

WARNING: Bandplan North American Band Plan has duplicates [10100000-10150000 30 Meter Band simplex , 10100000-10150000 30 Meter Band simplex ]

Line 64:

WARNING: Bandplan North American Band Plan has duplicates [29300000-29510000 Satellite downlink simplex , 29300000-29510000 Satellite Downlinks simplex ]

On and on adifinitum, for 64 lines. I see there was a bug report but not sure it was corrected.

I will get more info as I poke into it. As I started seeing all kinds of things that I did not recall

the last time I did anything with the 92AD

On Wed, Jul 4, 2018 at 12:36 PM Chuck Hast <kp4djt@gmail.com> wrote:

I found that one, for some reason the wrong PPA was enabled. It kept on coming up as
the snapshots, and looking at it from the console it looked good, but I invoked Synaptic
and saw it immediately (good old Synaptic)

Now I have the latest and greatest running but I still see things like it reading to 849
memories when it should go to 799.
Also seems to take a long longer to read the radio than I remembered.

Also I moved a group of channels down one to make room for another channel, it gave
the balloon that it was going to take some time to do it, OK'd the move and it showed
it was doing it, I refreshed the screen and it went to a blank screen.

Also in the D-STAR tab it shows a repeater call sign I cannot find but does not show on
that I have programmed in.

On Wed, Jul 4, 2018 at 11:57 AM Chuck Hast <kp4djt@gmail.com> wrote:
Folks,
Decided that I would go through my 92AD, remove a few frequencies I do not use, add
some and add my hotspot so I can try DStar on a hot spot.

See a lot of strange things like reading 849 memories (should only go to 799) and
one or other bank screens blank.

Looked at the bug reports and see all off what I see (Thank you Winlock) so just out
of a whim I look at the date of the code, says 20170714. I see that the latest and
greatest 20180623. I have the snapshots ppa enabled but for some reason it is not
pulling down the latest and greatest. Any ideas?

I am running Ubunut Mate 18.04

--
Chirp + Editcp + MD380Tools on Linux
Celestial!!!
Chuck -- KP4DJT

--
Chirp + Editcp + MD380Tools on Linux
Celestial!!!
Chuck -- KP4DJT