I can only hope that I learned to do something useful out of all this massive amount of time I have invested!
Best regards - Brian Carling AF4K Crystals Co. 117 Sterling Pine St. Sanford, FL 32773
Tel: +USA 321-262-5471
On Apr 1, 2015, at 9:57 PM, D.J.J. Ring, Jr. n1ea@arrl.net wrote:
If Bry finds a source of high quality cables he might start selling them along with a FREE Linux CD of CHIRP Daily Build and he'd become a Corporate Sponsor with a monthly stipend to the devels.
And cables that fit China radios, too.
73
David N1EA
On Apr 1, 2015 9:22 PM, "David Ranch" chirp@trinnet.net wrote:
Hello Bry,
This radio programmning crap is keeping so many hams off the air. I miss the days when you didn't need to program radios. They just worked, OR they were far simpler to set up memories.
No one said you had to program your radio via a computer. You can just use the keypad to get the same thing done. It's just usually a LOT harder.
Alternatively, if you want known quality, you can buy solutions from say RT Systems which include cables (those also occasionally go bad) and software but if you want to take your saved settings to a new radio, you have to buy THAT radio's software package. If you have 5 different radios.. that can get quite expensive in a hurry. Chirp doesn't follow that approach and one program attempts to program ALL radios but with a community based effort, you must temper your complaints with how much you paid for the software. $0 = a few complaints ;-)
--David _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com