Jim,
Thanks for the reply. I installed the factory image and then programmed with the "uploaded" file attached. I can modify the menu items now, but it does not take properly. Specifically, in Work Mode settings, I am programming 2m calling and 70c calling for A and B.
As you can see in the "downloaded" file attached, it takes programming for work mode settings of C and D without issue, but keeps changing A and B to channel 0/N5TEN on the display, even though that is not what I am uploading AND it changes them both in the work mode setting to channels that I do not even have programmed so that doesn't even match the displayed channels. I've never had issues with this or any of the other BTech stuff, or with CHIRP. Thank you!!!
-Darby
On Sun, Nov 24, 2019 at 3:22 PM Jim Unroe rock.unroe@gmail.com wrote:
On Sun, Nov 24, 2019, 4:16 PM Darby Collier collier.darby@gmail.com wrote:
Trying to program Uv50X2 and since this last update, it will not offer the option to set any of the menu items anymore such as scanning options etc. It will take the programming of channels and names but does not offer any menu options. Then when I revert to an old img file, it does not recognized the menu items that are in place from before so the channels I program via work mode do not program. I've tried doing a reset of both "ALL" and "VFO" only via the onboard menu but it still is not doing a hard factory reset. Help!!!!
Hi Darby,
Your radio has flipped a bit in memory that has caused 1or more settings to be out-of-range.
Email a CHIRP Radio Images (*.img) to me or attach it here and I will correct it and send it back to you.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to DarbyInGreen at collier.darby@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com