On Fri, May 11, 2018 at 10:16 AM, Pavel Milanes Costa <pavelmc@gmail.com> wrote:
> Hi Gene,
>
> Kenwood TK-372G Driver author here.
>
Pavel,
I took a look at the debug log this morning but didn't have time to
reply (and was hoping that you would also notice this discussion).
It appeared to me that the radio was being read OK. The problem, as I
saw it, was that CHIRP was receiving "P3720\x06\xfb" from the radio
but CHIP is expecting "P3720\x06\xff" (the last byte being FB instead
of FF).
It seems to me that a test driver could be posted that just changes
the FF to FB to see if the radio could be fully read by CHIRP. If it
can, then maybe all that is needed would be to add and additional
"fingerprint" to the driver.
Jim KC9HI
_______________________________________________ This message was sent to gene8348@gmail.com at gene8348@gmail.com
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com