That did it…..never expected for the cable to require that much force to snap in…
Thanks a million!
Max, KC8TGZ
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of John LaMartina ? Sent: Thursday, January 31, 2013 8:27 PM To: Discussion of CHIRP Subject: Re: [chirp_users] UV5R
Max,
The message you are getting is described at
http://www.miklor.com/uv5r/UV5R-ErrorMess.html
Looks like the cable is not seated properly.
John K3NXU
The UV5R USER's GUIDE: http://www.miklor.com/uv5r/UserGuide
and FAQ Page: http://www.miklor.com/uv5r/FAQ
will help you with the UV5R learning curve.
Hope this helps.
-----
Sent via iPadX
On Jan 31, 2013, at 8:05 PM, "Bernie Thames" thamesmeister@charter.net wrote:
Tried it but got an error saying the radio did not respond. Being totally unfamiliar with this radio, do I have to set it up or be in some menu area to download?
Max
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Bret Hedrington Sent: Thursday, January 31, 2013 1:18 PM To: 'Discussion of CHIRP' Subject: Re: [chirp_users] UV5R
The stable build does not support the uv-5r radios…
You have to use the latest daily build…
Try this one…
http://trac.chirp.danplanet.com/chirp_daily/daily-20130128
Bret
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Bernie Thames Sent: Thursday, January 31, 2013 11:05 AM To: 'Discussion of CHIRP' Subject: Re: [chirp_users] UV5R
I downloaded Chirp and have what I assume is the last stable build. However, I just got my radio, which is a Baofeng UV-5RA with BFB297 firmware. I went back to the website expecting to have this build since the one I downloaded 0.2.3 does not have my handheld. I went to the repository and couldn’t find a link that included mine.
Where can I find this one as, I’d at least like to have the build which is 2012-2221222 (I think).
Regards,
Max
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of John LaMartina ? Sent: Thursday, January 31, 2013 8:55 AM To: Harvey Iri; Discussion of CHIRP Subject: Re: [chirp_users] UV5R
I would guess you need the access tones to work properly.
CHIRP should be able to program you radio with no problem.
-----
Sent via iPadX
On Jan 31, 2013, at 7:51 AM, Harvey Iri kp4gyo@yahoo.com wrote:
Hello
I am having a small issue I tries to program my UV5R with the frequencies of my job and I cannot transmit on them, all it does is receive my co-workers, but no transmit. On my repeaters it works fine. the frequencies in question are in the 161 MHZ and 162 MHZ
range. I used the Baofeng Software, and did not work. So then I used the Chirp and was able to pu t it on the radio but again no transmit. Version on my radio is the older version. If there is any other software I can use to unlock those 2 frequencies let me know, if you have any questions for more information just email me.
Thanks,
Harvey.
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users