I've a Baofeng UV-5RA and when importing local repeaters in Chirp (only been
using since 1/11 & VIP before then & same problem), in Channel Mode it will
not ping one of 4 local repeaters but if I set it in VFO Mode, no problems.
In Channel Mode, I can hear other local repeaters but one I've programmed;
RX Freq.=147.180
TX Freq.=147.780
Tone=151.4
Offset=00.600

FYI, I've 2 other Ts, a Yaseau FT-11 & a B-K LPH-5142 of which both can get
the repeater, I can't talk to either of these from my Baofeng While in
Channel Mode but can in VFO Mode.
Any suggestions appreciated.
73s
Bill