The cable I have ends in a female DB9 and physically connects to the radio fine. One thing I observed was when I entered the Radio Download menu it keyed my Flex 6600; there's no reason for that as the Flex doesn't have that COM port in its CAT list. I've shut down the Flex and all other apps and rebooted the computer with the TM-D700 on and the FTDI cable connected at both ends. This time the Radio Download action in Chirp resulted in the fan coming on for about 2 minutes on the TM-D700, and then still no results on the screen. Could you tell me how to generate a debug log? I've enabled Developer mode but that menu is still grayed out even after restarting Chirp.
Thanks, Mark
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Dan Smith via chirp_users Sent: Monday, March 4, 2024 5:36 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] No Download from Kenwood TM-D700a
I have the Kenwood TM-D700A powered on and connected to my computer via a BlueMax49ers FTDI cable. Chirp correctly identifies the COM port confirmed as the FTDI cable in Device Manager. The Radio à Download from Radio menu selection opens the popup with the COM port, make, and model selections all available. Clicking OK results in the FTDI lights blinking for a few seconds and then nothing. What’s missing where there’s no download of the radio’s memory, which has most all memory slots filled with something?
Hard to say without a debug log (in a bug). I don't think you're missing anything, assuming that the radio is set to be controlled by the PC and you have proper cabling. The D700 is weird because it has a male DE9 on the front. IIRC, you need a gender changer but *not* a NULL modem to interface it to a normal PC DCE serial port. The hang you're seeing is the driver trying to quickly probe the baud rate of the radio, and I'm assuming, getting no response. But, if your cabling is indeed right a debug log will tell us if something else is happening.
--Dan
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Mark Walker at mark@marwalk.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com