Also here is the last entry from the log on the PC side..
[2016-10-12 18:50:12,667] chirp.ui.inputdialog - ERROR: ---------------------------- [2016-10-12 18:50:42,362] chirp.ui.mainapp - DEBUG: User selected Yaesu FT-817ND on port COM6 [2016-10-12 18:50:42,410] chirp.ui.clone - DEBUG: Clone thread started
On 10/12/16, 6:37 PM, "Kevin Utzy" <chirp_users-bounces@intrepid.danplanet.com on behalf of krutzy62@gmail.com> wrote:
Have you made sure the cat rate is set to an equal value to that of the program? I don't use CHIP for my FT-817, however the problem you describe sure sounds like a baud rate difference.
Kevin KA4RNH
On 10/12/2016 9:24 PM, Carla Ruigh wrote: > Hello, I am having a heck of a time trying to start the process of programming my ft817 by doing the initial download. I bought one cable, and after multiple failures using both Mac and PC, I bought another cable, the more expensive one. On the Mac side, I’ve downloaded and installed the ftdi drivers from here: http://www.ftdichip.com/Drivers/VCP.htm . Still does not work. The radio just goes into “error”. I’m not getting an error message from Chirp. The Radio screen just starts flashing “Error” a few seconds after I put it into transmit mode. The Drivers appear to be working as the download dialog shows “dev/cu.usbserial-AI04KBP8” as an option. I really don’t have any idea what else to try. On the PC side, (under parallels), under “Devices” I connect the FT232R USB UART to the PC. Same thing happens. I go to download from radio, now “Com6” is what shows up, when I hit transmit it just errors out after a few seconds. No error message from CHIRP. The clone dialog just sits there open. Would sure appreciate any suggestions. Getting really frustrated. –cj- > > On 10/12/16, 5:17 AM, "awake" <chirp_users-bounces@intrepid.danplanet.com on behalf of awake@0324am.net> wrote: > > Hi, > > A while ago I purchased a TYT-8000E and I'm trying to figure out > whether there's a way how to make it work with chirp. It's quite > a decent Chinese model, sort of a better built Baofeng with 10W > transmit power and an accordingly sized battery :) > I've seen there's a new model request #2837 for it, from about > a year ago, but no activity on it. > > Are there any other people on this list using this radio? If yes, > which SW are you using to program it? > > Also, if there's a developer willing to implement the support for > this radio, I could provide hardware on loan and/or help out with > testing.. > > Cheers, > rad0 > > -- > Connection closed by remote ghost. > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Carla Ruigh at swngdncr@garlic.com > To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com > > > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Kevin Utzy at krutzy62@gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Carla Ruigh at swngdncr@garlic.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com