Hi All
I am using Chirp on Puppy Linux Slacko (Slackware)
I am using the source code of Chirp. In Slacko I have the full Python development system.
The only other thing I had to install to get Chirp to work was Python Serial.

I started up Chirp by typing into the terminal window chirpw.
I was able to down load the image of my IcomV82 into Chirp.

I noticed on the Repeater2 column that the callsign was W2DNY C.
Is this normal? Shouldn't the C be a G?
I clicked on the WD2NY C in the Repeater2 column and a drop down list opened which
only contained WD2NY C and the other repeater callsigns that I have programed into my radio.

All the callsigns had a C at the end none with a G at the end.
These Callsigns are in my Repeater1 column which a C makes sense. Again shouldn't the
Repeater2 callsings have a G for gateway. The memories in the radio for Repeater2 all have a G
in them.

It looks like Chirp did not read the repeater2 memories of the radio correctly.

Any help in this matter will be greatly appreciated.
Thank you for your time in reading this E-Mail.

-- 
Let us hope we never witness the "Silence Of The Hams"
73 DE John KB2SCS
           Packet:    KB2SCS@WA2PNU,#NLI.NY.USA.NOAM
           E-Mail:    kb2scs@arrl.net
           Web Page:  http://www.qsl.net/kb2scs