Hi Basil,

Please do report this bug, and be sure to include the debug.log, and a copy of radio image which was downloaded.

---

From: Basil Copeland <blcjr2@gmail.com>

To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>

Sent: Thursday, January 23, 2014 8:29 PM

Subject: Re: [chirp_users] Problems with Yaesu -- FT60 and FT-8800

Okay, here are some results from a bit of testing with versions.

1) The error is replicated in 20140102 (which is the first version of CHIRP I used).

2) When I installed the current "stable" version, the error is not present, and the write to the FT-60 is successful.

3) When I reinstalled 20140102 "on top of" the stable version (i.e. without first doing a complete uninstall), it also worked!  But when I did a complete uninstall, and reinstall of 20140102, the error returned.

4) I went back to the 20131031 version.  When this was installed "on top of" the stable version, same result as in 3), i.e. no error.  But when I did a complete uninstall, and reinstalled 20131031, the error returned.

5) Lastly, did a complete uninstall, and installed 20131002.  This version worked, like the stable version.  No error.

So, somewhere between 20131002 and 20131031, the error enters.  I guess you could check change logs for the builds in October for any changes that would affect Yaesu radios.  Incidentally, I notice that between 20131002 and 20131031, the read and write instructions (steps to set the radio for rx or tx) were added.  Had I started with the "stable" build, or even 20131002, I wouldn't have known what to do (without further research) to set the radios for read or write.

Basil

On Thu, Jan 23, 2014 at 5:51 PM, IZ3GME Marco <iz3gme.marco@gmail.com> wrote:

Good news!
Can you please try again with the daily build to confirm is only a version problem?
I can't test myself for a couple of days ...

Tnx

73 de IZ3GME Marco

On Thu, 23 Jan 2014 17:43:56 -0600

Basil Copeland <blcjr2@gmail.com> wrote:

> It may be too late for that?  I just installed the "stable" version, and it
> worked.  So this is an issue with the daily build version I was using, or
> so it would seem.
>
> Basil
>
>
> On Thu, Jan 23, 2014 at 5:34 PM, IZ3GME Marco <iz3gme.marco@gmail.com>wrote:
>
> > Hi Basil
> > I think there can be some useful info in the log, can you please reproduce
> > the problem and send it?
> > Here is how to collect debug log
> >
> > http://chirp.danplanet.com/projects/chirp/wiki/How_To_Report_Issues#Getting-your-debug-log
> >
> > tnx
> > 73 de IZ3GME Marco
> >
> > On Thu, 23 Jan 2014 16:31:20 -0600
> > Basil Copeland <blcjr2@gmail.com> wrote:
> >
> > > Thanks for the prompt reply.  At least with respect to the FT-60,
> > Commander
> > > was not open; at that point, it had not even been installed.  IAC, I just
> > > went through the whole process again with the FT-60.  Same error.
> > >
> > > Seems curious to me that this would happen with two different cables
> > > connected to two different radios.  I really do not see how it could be a
> > > cable issue.  Driver issue, perhaps.  That would be the only common
> > > denominator.  The driver is FTDI 2.8.30.0, dated 7/12/13, and installed
> > > using COM4, as COM1/3 is reported "in use" (that would be for a Prolific
> > > driver/USB cable used with the UV-5R).
> > >
> > > Basil
> > > KE5GAE
> > >
> > >
> > > On Thu, Jan 23, 2014 at 3:58 PM, Tom Hayward <esarfl@gmail.com> wrote:
> > >
> > > > On Thu, Jan 23, 2014 at 1:27 PM, Basil Copeland <blcjr2@gmail.com>
> > wrote:
> > > > > windows, with a final error message saying something about being
> > unable
> > > > to
> > > > > "read echo" and then "bad cable?"
> > > >
> > > > This error means that Chirp tried to send something out over the
> > > > serial port and didn't get a response. With Yaesu cables, everything
> > > > sent should echo back to the serial port, because the tx and rx lines
> > > > are connected together. The cause of this is usually, as reported, a
> > > > faulty cable or driver. My only other idea is that another program may
> > > > have been using the serial port when Chirp tried to access it. Was
> > > > Commander still open?
> > > >
> > > > Tom KD7LXL
> > > > _______________________________________________
> > > > chirp_users mailing list
> > > > chirp_users@intrepid.danplanet.com
> > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users@intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users