Since the Kenwood requires echolink mode to key radio w/o VOX it uses RTS pin to key. I set Radio back to non-echolink and was able to read memories. Does CHIRP enable RTS pin in serial port when it reads memories? Would seem so.
Jim WB8EYE
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Michael Rathbun Sent: Monday, September 14, 2020 9:22 AM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Chirp, upon read radio memory keys radio
On Mon, 14 Sep 2020 08:44:19 -0400, norcrossjcn@gmail.com wrote:
Chirp, upon read data memory, keys radio Instead of having it go to PROG mode.
With one of the programming cables I use with Baofeng units, the unit keys up as soon as Chirp accesses it. Apart from switching cables to one that doesn't do that, the solution was to make sure the unit was tuned to a channel where it was set to disallow transmit (e.g. the NWS on 162.55).
mdr
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to James Norcross at norcrossjcn@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com