Hey Peter, Definitely download & try the newer version of CHIRP. You mentioned v 0.2.1 but 0.3.1 is the current stable version, you might even need the daily build of CHIRP depending on when support for the 857 was added.
I don't know if the USB cables are really the same or not, but I do know that Valley Ent sells a cable for the 857 and a different cable for the 7900. Same for RTSystems. If you are using a non-USB cable, then it might be all different, I dunno.
The Valley Ent USB cable for the 7900 is specified to work with Yaesu models: FT-7800, FT-7800E, FT-7800R, FT-7900, FT-8800, FT-8800E, FT-8800R, FT-8900, FT-8900E, and FT-8900R. http://www.valley-ent.com/catalog/yaesu-ftdi-programming-cable-ft7800-ft8800...
The Valley Ent USB cable for the 857 is specified to work with FT-100, FT-817, FT-857, FT-897, FT-100D, FT-817ND, FT-857D, amd FT-897D. http://www.valley-ent.com/catalog/yaesu-ftdi-ct62-cable-ft100-ft817-ft857-fe...
RTSystems also sells a different USB cable for the 857 vs the 7900. Their model USB-62 Cable is for the 857/897. https://www.rtsystemsinc.com/FT-857-programming-software-and-USB-cable-s/192...
Their model USB-29B is for the Yaesu FT-7900 https://www.rtsystemsinc.com/FT-8000-programming-software-and-USB-cable-s/19...
I'm not saying you have to buy either of from these guys, but this does _seem_ to indicate that cables are different. But I could easily be wrong, I don't have personal experience on this.
Best, Dave
On Sep 7, 2013, at 4:26 PM, Milton Hywatt mhywattt@yahoo.com wrote:
I think the FT-857 uses the same interface. Give that a try if you have your driver situation sorted.
From: Peter Strauss ko6r@yahoo.com To: "chirp_users@intrepid.danplanet.com" chirp_users@intrepid.danplanet.com Sent: Saturday, September 7, 2013 5:47 PM Subject: [chirp_users] Baffled by CHIRP
Hello: I'm a newbie to this group.
I just was loaned a cable that works perfectly for my friend who has an FT-7900. I have an FT-897.
Questions:
- Is there a problem with compatibility with the cable? The indicator does glow red when I'm plugged into a USB port.
- I downloaded CHIRP to both my ubuntu 10.04 drive and my XP drive. On the Ubuntu version, there is no option for FT-897. That's version 0.2.1.
On the XP drive, there is that option. However, for both, I get an error on the radio after I've hit transmit. On Ubuntu, I'm told that the header couldn't be read. No message on the XP version, but no luck either -- same error shows up on the radio. Now what? 3. Tried to figure out how to get an updated version for Ubuntu, so that I could find the FT-897 listed. Couldn't find that.
Feeling like a total dummy at this point, and disappointed that I couldn't just plug it in and go for broke. Any help greatly appreciated.
Peter KO6R